═══ 1. PMReadCD ═══ This is general help for PMReadCD Version 2.0b. Thank you for use this CDrom utility. ═══ 1.1. Combination Box ═══ Two comb boxes are used by PMReadCD ═══ 1.1.1. Target dir ═══ Help for Target dir comp box. This comb box should display all available partitions on you machine. Select one of them, to save the extracted audio data. ═══ 1.1.2. CDrom ═══ Help for CDROM comb box. The comb box should display all available cdroms on your machine. Select one of them, to play or extract music data. ═══ 1.2. Path ═══ Help for Path entry field. You can specify a directory, where to save the audio data. If you do it, then always begin with a back slash "\" ! But do not put on at the end of the path. \music ═══ 1.3. Check Button ═══ Two check buttons are used by PMReadCD ═══ 1.3.1. WAV ═══ Help for WAV Format. If you check this button, the extracted audio data will be saved with a wav-header. The output file can then be played with any wav-player. ═══ 1.3.2. RAW ═══ Help for RAW Format. If you check this button, the extracted audio data will be saved without any header to the target directory. ═══ 1.4. Config ═══ Help for Config Menu. ═══ 1.4.1. Sectors per transfer ═══ On default PMReadCD will read 27 sectros per transfer. To avoid "READLONG_ERROR" problems, reduce it to a lower value. ═══ 1.5. Error Codes ═══ ┌────────────────────┬──────────────────────────────────────────────────┬──────────────────────────────────────────────────┐ │Error │Sympton │Solution │ ├────────────────────┼──────────────────────────────────────────────────┼──────────────────────────────────────────────────┤ │DeviceStatus#_ERROR │Cannot access correctly the cdrom │Check the cdrom, if it is operable │ ├────────────────────┼──────────────────────────────────────────────────┼──────────────────────────────────────────────────┤ │GETAUDIOTRACK_ERROR │Cannot read the track info from CD │Maybe a time critical problem, try again │ ├────────────────────┼──────────────────────────────────────────────────┼──────────────────────────────────────────────────┤ │GETAUDIODISK_ERROR │Cannot correctly read data from CD │Try again │ ├────────────────────┼──────────────────────────────────────────────────┼──────────────────────────────────────────────────┤ │DosOpen_ERROR │PMReadCD cannot open the file to store it │Check the file name and the target partition │ ├────────────────────┼──────────────────────────────────────────────────┼──────────────────────────────────────────────────┤ │DosWrite#_ERROR │Unable to write the file to the destination path │Check for enough space on partition │ ├────────────────────┼──────────────────────────────────────────────────┼──────────────────────────────────────────────────┤ │READLONG#_ERROR │Cannot read the sector from the CD │Check if nothing interrupt the operation of the CD│ ├────────────────────┼──────────────────────────────────────────────────┼──────────────────────────────────────────────────┤ │StopAudio_ERROR │Cannot stop playing audio │Try again. │ ├────────────────────┼──────────────────────────────────────────────────┼──────────────────────────────────────────────────┤ │PlayAudio_ERROR │Maybe CD was unlocked │Restart PMReadCD and reinsert the audio CD │ ├────────────────────┼──────────────────────────────────────────────────┼──────────────────────────────────────────────────┤ │CDROM_ERROR │Cannot access properly the CDROM drive │Check for availability to the system │ └────────────────────┴──────────────────────────────────────────────────┴──────────────────────────────────────────────────┘ # represents a value! If the solution given here doesn't help, then fill out the [PMReadCD.ERR] form, and send it to my email address. ═══ 2. Technical Info ═══ PMReadCD Version 2.0b was developed under OS/2 Warp Server German:  64mb RAM  1280x1024x65536  SCSI bus  Toshiba 3401B CDROM  Yamaha CDR100 ═══ 2.1. Programs ═══ PMReadCD Version 2.0b was developed using the following programs:  VisualAge C++ 3.0 from IBM  Information Presentation Facility Compiler Version 3.00.016 October 19 1995 from IBM  VisProC 3.0 from HockWare  EPM Editor 6.03a from IBM ═══ 2.2. Literature ═══ The following literature was used while developing PMReadCD Version 2.0b  OS/2 Warp Control Program API by Marc Stoc; ISBN 0-471-03887-3  online Help from the ToolKit ═══ 3. Updates ═══ Updates can be found at http://www.rz.uni-frankfurt.de/~humberto/os2/readcd.html ═══ 4. Contact the author ═══ Humberto Almeida Wegscheidestrasse 50 60435 Frankfurt Tel.: +49-172-6521908 Fax.: +49-69-54890249 email: humberto@stud.uni-frankfurt.de Home-Page: http://www.rz.uni-frankfurt.de/~humberto Thank you for use this CDrom utility.